Why We Love Bilderrahmen-Erlangen (And You Should, Too!)





rustic style is the perfect marital relationship of old and brand-new, and provides a special interest those who value the natural. The warmth of wood utilized in rustic design pairs naturally with upcycled and found items, and for numerous, its capability to adjust produce an easy method when styling a house.
DIY rustic barn wood frame.
I'll take all of the weathered barnwood that I can discover for jobs. If you're browsing, you may have luck looking through salvage stores that gather materials from demolitions; I have actually even had luck on Craigslist, from organisations and property owners who disassemble old structures and recycle and disperse the lumber for others to enjoy. Old lumber makes a lovely rack or tabletop, and throughout the years, I've talented numerous custom-made barn wood photo frames like the one revealed above.




Choose a size for your image frame. I like to choose a typical size for a few factors-- you can discover an inexpensive frame at a thrift store, and repurpose its glass pane. And, when it's a standard size, it's simpler to discover art work to fill your frame. That said, if you have a custom-sized art piece to frame, it's constantly convenient to know how to make your own picture frame for it.

It's most convenient to try and cut all four sides from a single board. If you need to use two boards (for a big frame, maybe), make sure the boards are precisely the very same width and depth for symmetry, and so that the mitered corners match.




You're going to mark each of the pieces of your frame on the board utilizing a speed square with a 45-degree angle and a tape measure. The shorter end of each area will be the within your frame and the same size as your desired artwork/piece of glass; the longer will be the outer edge. This image (that I increased a little in Photoshop) should help you comprehend how I planned one board to develop a simple 8" x10" photo frame.


Use the miter saw to make these cuts. The saw blade will take an additional 1/8" off at the cut mark, so make certain to remeasure your board before each subsequent cut so that the inside edge of your board procedures precisely to the wanted size of your frame opening.

When you have all four boards mitered to have 45-degree angles, do a dry fit to be sure that they fit together as expected.


At this point, you could theoretically use some wood glue and L-brackets to reinforce the corners, and have yourself an ideal little frame. It would be terrific if you were aiming to avoid the glass and frame something that wasn't an image.

If you are framing an image, I constantly prefer notching out a space in the back within edge of the frame. This will allow the glass and art to sit inset which simultaneously strengthens how the glass is positioned, and permits the frame to sit flush versus the wall.

To make this notch, you'll utilize a router and a rabbet bit to carve out a space for the glass and art to sit within. The bit is designed to glide along the edge of the board you're cutting, which makes it simple to attain a constant notch all of the way around.
I use a biscuit joiner to link the mitered 45-degree edges of each board. Dry fit the frame together once again, and utilize a marker or pencil on the backside of the frame to mark a straight line across each joint. You will utilize that mark when you line up the joiner.
Utilize the biscuit joiner to produce notches in each board. The wooden biscuits will suit the cutout produced, and wood glue will be used to secure them in position when you put together the frame.
When the glue has dried and the frame is solid, include hardware to the backside to make the frame usable. Healing plates successfully keep the glass pane and artwork secured in the rabbeted edge of the frame, and D-rings and wire make it possible to hang it.





I have actually long delighted in the visual of a nice dimensional shadow box to show images, treasures, and found things. They truly lend themselves to an innovative canvas like no flat photo frame can, thanks to having an integrated gap in between the back of the frame and the glass. I've used them a lot when creating friendly little Daddy's Day gifts and graduation presents, and recently, when I stumbled upon a Browse this site set at the store, I decided to make my own to add a little something special to my own house's design.

Note: That's not me, simply the frame woman and the frame boy. I truly liked that this trio of 8.5 × 11 ″ frames was bundled and sold for $20. If you have a 40% off voucher at the craft store, you may even get the rates down more detailed to $12, high-five. They're affordable, yet not finished and constructed well enough for me to be distressed about tearing them apart and painting them:



First things first: That matte black plastic finish wasn't quite ideal for me. It wasn't in bad shape, not that at all, however rather of blacks, my home's palette provides more to grays and browns.





Enter Rust-Oleum Oil-Rubbed Bronze spray paint: Each frame was provided a glossy new coat, instantly changing them into something that might be hung on any wall or put on any rack.

While the frames dried, I started to map out my plan. Beginning by producing my own background for the shadow boxes, I utilized standard drawing paper (in an ivory color) and traced details sized to match the back panel of the shadow boxes.

Trimmed with scissors (and an utility knife for the finer curves), I was all set to start planning the company of my little treasures.

The treasures themselves, were seashells. Not necessarily seashells that I discovered and collected for many years and am framing for sentimental reasons, just a stash of shells that I purchased a yard sales and saved in a quite blue glass container till I discovered an excellent reason to utilize them.

I didn't know precisely what I was going to develop when I started. I played with lots of different plans prior to I began to glue anything in place. A few of my favorites were:

Leave a Reply

Your email address will not be published. Required fields are marked *